Request a Quote or Demo

Series 064, 1" / DN25 Pressure Eliminator

  • Flat-Face design    
  • Connection under pressure
  • One-hand operated

    LEH Series 064 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 064 connects with couplings in Series 065.

    T
    he pressure eliminator nipples are also available in five smaller sizes; 1/4 " / DN 6.3 (Series 264), 3/8" / DN 10 (Series 364), 1/2" / DN 12.5 (Series 564), 5/8" / DN 16 (Series 664) and DN19 (764).    
Technical data
Nominal flow diameter: 25 mm (1")
Rated flow: 150 l/min (33.0 GPM UK)
Max. working pressure connected: 35.0 MPa
Min. burst pressure connected: 120.0 MPa
Min. burst pressure disconnected: 120.0 MPa
Temperature range: -30°C — +100°C (-22°F — +212°F)
Material nipple: Hardened steel (zinc passivation)
Connectability: With static pressure up to 350 bar on the nipple side
Disconnection under pressure: Not allowed
Comment: Connects with couplings in CEJN 065 series and other brands DN25 - 1" couplings within the ISO 16028 standard

Rated flow is measured at 1 bar pressure drop. Flow measured with coupling Series 065.



Nipples with pressure eliminator Part No. Connection Length Diameter Hexagon Seal
Female thread 100646203 G 1" (BSP) 143.4 54 46 NBR
100646204 G 1 1/4" (BSP) 144.4 60 55 NBR
100646263 1 5/16"-12 UN ORB (1" SAE) 146.4 50 46 NBR
100646281 G 1 1/4" JIS ORB 144 60 55 NBR